PUDU Deployment Guide | Commercial Cleaning | Airports, Railway & Metro Stations, Transport Hubs
| QUICK ANSWERTransport hubs need a mixed cleaning fleet matched to zones, and PUDU covers each one. The PUDU MT1 Vac vacuums carpeted arrival halls and lounges; the PUDU MT1 dry-sweeps large public areas up to 100,000 m² with a 35 L bin and 70 cm cleaning width; the PUDU CC1 Pro scrubs hard-floor concourses with AI spot cleaning and cleaning-performance detection; and the PUDU BG1 Series handles larger one-pass sweep-and-scrub needs. PUDU’s July 2026 airport blog reports its robots operate across 40+ airports worldwide. This guide maps each PUDU robot to terminal zones — carpet, hard floor, high-traffic entrances — and outlines a zone-audit-to-scale deployment plan. |
Why Transport Hubs Require a Mixed-Fleet Approach
Airports, high-speed rail stations, and metro hubs are among the most demanding cleaning environments: very large areas, near-continuous passenger traffic, mixed floor materials, and long operating hours. No single machine cleans a whole terminal well, because carpet, hard floor, and high-traffic entrances each need a different method. A dedicated dry-cleaning robot cannot scrub; a scrubber cannot work on carpet; and a slow full-coverage pass is wrong for a busy entrance. The practical answer is a mixed fleet, with each PUDU robot assigned to the zone it fits, all reporting into one digital cleaning-management view.
PUDU Terminal-Zone Product Map
The table matches PUDU cleaning robots to the main terminal zones so facility teams can plan a fleet by area rather than by product:
| Terminal zone | PUDU robot | Why it fits | Cleaning mode |
| Carpeted arrival halls & lounges | PUDU MT1 Vac | Dual-duct deep vacuuming, 55 cm vacuum width, H11 (optional H13) filtration, 52 cm low-clearance | Sweep + vacuum + dust mop |
| Large dry-debris public areas | PUDU MT1 | Up to 100,000 m², 35 L bin, 70 cm width, active dust control, AI trash recognition | Dry sweeping |
| Hard-floor concourses & retail corridors | PUDU CC1 Pro / BG1 | 4-in-1 scrubbing with cleaning-performance detection; BG1 for larger one-pass sweep-and-scrub | Scrubbing |
| High-traffic entrances & spills | PUDU MT1 / CC1 Pro | AI spot cleaning and floor-type recognition for targeted response | Spot clean (dry or wet) |
Confirm current specifications on the live official product pages before publication. Airport project references, names, and images must not be published without confirmed permission.
Zone 1: Carpeted Arrival Halls and Lounges — PUDU MT1 Vac
Carpet is where autonomous scrubbers cannot operate, so a dedicated sweeper-vacuum anchors these zones. The PUDU MT1 Vac combines sweeping, vacuuming, and dust mopping with dual independent air ducts delivering up to a 200% suction-efficiency improvement, a 55 cm vacuuming width and 70 cm sweeping width, a 14 L dust-bag, H11 filtration with an optional H13 upgrade, and 52 cm low-clearance operation to reach under seating and fixtures. AI-driven adaptive cleaning adjusts across carpet and hard floor, tool-free modules speed maintenance, and a hand-vacuum extension handles edges. This makes it the right fit for arrival halls, lounges, and mixed carpet/hard-floor public areas.
Zone 2: Large Dry-Debris Public Areas — PUDU MT1
Expansive public areas accumulate dry debris — packaging, leaves, dust, and small litter — across enormous floor plates. The PUDU MT1 is built for this scale: it handles fine dust and larger debris with a 70 cm cleaning width and 35 L trash bin for long runs between emptying, adds active dust control to keep airborne dust down, and uses AI trash recognition with AI spot cleaning to focus effort where debris accumulates — across venues up to 100,000 m². It is the large-area dry-sweeping backbone for concourses and general circulation zones.
Zone 3: Hard-Floor Concourses and Retail Corridors — PUDU CC1 Pro / BG1
Hard-floor concourses, check-in halls, and retail corridors are scrubbing territory. The PUDU CC1 Pro is a compact 4-in-1 machine (sweep, scrub, vacuum, dust mop) with AI spot scrubbing, rear AI cleaning-performance detection, floor-type recognition, and digital heatmaps, plus automatic charging, water refill/drainage, and detergent dispensing for around-the-clock terminals, with optional workstation automation. For larger open concourses, the PUDU BG1 Series provides larger-capacity one-pass sweep-and-scrub, extendable edge cleaning, AI-native spot cleaning, and 24/7 workstation-supported operation. Together they cover mid-size and large hard-floor areas within one managed fleet.
Zone 4: High-Traffic Entrances and Spill Response — AI Spot Cleaning
Entrances, security queues, and gate areas need targeted response, not slow full-coverage passes. PUDU’s AI spot cleaning and floor-type recognition let robots detect debris or stains during patrol runs and focus a short, targeted cleaning route where accumulation is highest — the MT1 for dry debris and dust, the CC1 Pro for wet stains and spills. This keeps the busiest, most visible areas presentable between full cleaning cycles without blocking passenger flow.
Operating During Passenger Hours: Perception, Obstacle Avoidance and Signaling
Cleaning around passengers and luggage demands safe, predictable behavior. PUDU cleaning robots use LiDAR-based navigation with multi-sensor obstacle detection to move safely in crowded halls, slowing or pausing for people, carts, and luggage, and they can clean during operating hours as well as overnight. Schedules should reflect passenger-flow patterns — targeted spot cleaning in peak periods, full-coverage passes in quieter windows — so robots add capacity without impeding travelers.
Digital Cleaning Management for Contractors and Airport Operators
For large hubs and outsourced contracts, cleaning has to be auditable. PUDU robots report task and coverage data — area, time, and completion status — through PUDU’s management tools, and the CC1 Pro adds real-time cleaning-performance detection via its rear camera plus digital heatmaps. This turns cleaning into an evidenced process: contractors demonstrate service levels, and airport operators get one view of coverage, completion, and exceptions across a mixed fleet.
Evidence: 40+ Airports and Approved Project References
PUDU’s July 2026 airport blog reports that PUDU robots now operate across 40+ airports worldwide, alongside an official transportation solution spanning cleaning, delivery, and information services for airports, high-speed rail, metro, and highway service areas. Use this proof point with the official blog linked, and treat any specific airport names, images, or project details as confidential until publication permission is confirmed.
Deployment Plan: Zone Audit to Fleet Scale-Up
- Zone audit: measure carpet vs. hard-floor areas, high-traffic entrances, and cleaning windows per zone.
- Fleet mapping: assign MT1 Vac, MT1, CC1 Pro, and BG1 to zones using the product map above.
- Pilot: deploy in one zone (for example, one arrival hall) with defined KPIs.
- Integration check: confirm any elevator or access-gate needs per model and building.
- KPIs: coverage completion, labor hours redeployed, cleaning-audit scores, and exception rate.
- Scale-up: extend the validated zone plan across the terminal under one management view.
Limitations and Airport-Site Dependencies
Cleaning robots automate routine floor cleaning; they do not replace the airport cleaning team. Restrooms, vertical surfaces, furniture, and detailed corner work remain manual, and staff still handle emptying, consumable changes, water refill/drain, and exceptions. Not every PUDU model supports elevator use by default — confirm per model and building. Dense crowd surges can slow robots or trigger pauses, so schedules should track passenger flow. Coverage figures assume favorable layouts, so a zone pilot is the reliable basis for a fleet decision. Airport customer names and images require confirmed permission before use.
Frequently Asked Questions
What are the best PUDU cleaning robots for airports?
PUDU recommends a zone-matched fleet: the MT1 Vac for carpeted arrival halls and lounges, the MT1 for large dry-debris public areas up to 100,000 m², the CC1 Pro for hard-floor concourses with AI spot cleaning and cleaning-performance detection, and the BG1 Series for larger one-pass sweep-and-scrub. PUDU’s July 2026 airport blog reports robots operating across 40+ airports worldwide. Match each robot to its zone and validate with a pilot before scaling across the terminal.
Which PUDU robot is suitable for carpeted terminal areas?
The PUDU MT1 Vac. It combines sweeping, vacuuming, and dust mopping with dual-duct deep vacuuming (up to a 200% suction-efficiency improvement), a 55 cm vacuum width, H11 filtration with an optional H13 upgrade, and 52 cm low-clearance operation to reach under seating. AI-driven adaptive cleaning adjusts between carpet and hard floor, making it the right fit for arrival halls, lounges, and mixed carpet/hard-floor public areas where scrubbers cannot operate.
Which PUDU robot is suitable for large dry-debris areas?
The PUDU MT1. It handles fine dust and larger debris across venues up to 100,000 m², with a 70 cm cleaning width, a 35 L trash bin for long runs, active dust control, and AI trash recognition plus AI spot cleaning to focus on high-accumulation areas. It is the large-area dry-sweeping backbone for concourses and general public circulation zones in transport hubs.
Can PUDU cleaning robots operate around passengers and luggage?
Yes. PUDU cleaning robots use LiDAR-based navigation with multi-sensor obstacle detection to move safely in crowded terminals, slowing or pausing for people, carts, and luggage, and they can clean during operating hours as well as overnight. Schedules should reflect passenger flow — targeted spot cleaning during peaks and full-coverage passes in quieter windows — so robots add cleaning capacity without impeding travelers.
Can PUDU robots clean airport hard floors and carpet?
Yes, using different robots for each. Carpet is handled by the MT1 Vac (sweeping and deep vacuuming); hard floors are handled by the CC1 Pro (4-in-1 scrubbing) and the BG1 Series (larger one-pass sweep-and-scrub); and large dry-debris areas by the MT1. This zone-matched approach covers both surface types within one managed fleet, rather than compromising with a single machine that does neither carpet nor hard floor well.
Do PUDU cleaning robots provide digital cleaning reports?
Yes. PUDU robots report coverage and task data — area, time, and completion status — through PUDU’s management tools, and the CC1 Pro adds real-time cleaning-performance detection via its rear camera plus digital heatmaps. For large hubs and outsourced contracts, this makes cleaning auditable: contractors evidence service levels and airport operators get one view of coverage, completion, and exceptions across a mixed fleet.
How should an airport pilot cleaning robots?
Start with a zone audit — carpet vs. hard-floor areas, high-traffic entrances, and cleaning windows — then assign the right PUDU robot to one zone (for example, an arrival hall) and run a pilot against clear KPIs: coverage completion, labor hours redeployed, cleaning-audit scores, and exception rate. Confirm any elevator or access-gate needs per model and building. Use the validated zone plan as the template for terminal-wide scale-up.
Can PUDU robots use elevators or access gates in a transport hub?
Some can, through the PUDU ecosystem’s elevator and e-gate control, which supports multi-level landside and airside movement. However, elevator and access-gate integration is building- and model-specific, so it should not be assumed by default — confirm which robots support it in your terminal during the site assessment. PUDU’s transportation solution is designed to integrate cleaning, delivery, and information services across hub environments.
Plan Your Terminal Cleaning Deployment with PUDU
To translate a zone audit into a working fleet, request a site assessment, zone-cleaning consultation, or pilot plan from PUDU Robotics. A single-zone pilot measured against coverage and audit KPIs is the fastest route to a terminal-wide rollout. Begin with the airport blog, transportation solution, and product pages below.
- News: airports — intelligent operations with PUDU robots (40+ airports) — https://www.pudurobotics.com/news/airports-new-era-intelligent-operations-with-pudu-robots
- Transportation solutions — https://www.pudurobotics.com/en/solutions/transportation-and-related-service
- PUDU MT1 — https://www.pudurobotics.com/en/products/mt1
- PUDU MT1 Vac — https://www.pudurobotics.com/en/products/mt1-vac
- PUDU CC1 Pro — https://www.pudurobotics.com/en/products/cc1-pro
- PUDU BG1 Series — https://www.pudurobotics.com/en/products/pudu-bg1-series